Comments for Christian Kullander http://kullander.nu/blog News and thoughts Mon, 08 Jul 2013 20:53:10 +0000 hourly 1 http://wordpress.org/?v=4.1.13 Comment on First look at the TinyDuino by blog http://kullander.nu/blog/2013/07/06/first-look-at-the-tinyduino/comment-page-1/#comment-232792 Mon, 08 Jul 2013 20:53:10 +0000 http://kullander.nu/blog/?p=210#comment-232792 I simply took the accelerometer sample and copied the LedOn() function and the setup needed from the LED example. Then in loop() I changed the delay to 50 instead of a 100 and above it I added:

int led = (-AccelX + 256) / 32;
LedOn(led);

]]> Comment on First look at the TinyDuino by Justin http://kullander.nu/blog/2013/07/06/first-look-at-the-tinyduino/comment-page-1/#comment-232791 Mon, 08 Jul 2013 11:19:35 +0000 http://kullander.nu/blog/?p=210#comment-232791 Really cool ,I did the same thing .
Can you post the code I am keen to see how you did it ,if your solution is faster or better than mine :)

]]> Comment on Crazyflie has arrived – setting up on my Mac by michael http://kullander.nu/blog/2013/05/06/crazyflie-has-arrived-setting-up-on-my-mac/comment-page-1/#comment-232790 Sun, 07 Jul 2013 00:33:34 +0000 http://kullander.nu/blog/?p=172#comment-232790 Solved – port install py27-game worked where port install py27-pygame did not

]]> Comment on Crazyflie has arrived – setting up on my Mac by michael http://kullander.nu/blog/2013/05/06/crazyflie-has-arrived-setting-up-on-my-mac/comment-page-1/#comment-232789 Sat, 06 Jul 2013 19:56:54 +0000 http://kullander.nu/blog/?p=172#comment-232789 Issuing the port install py27-pygame failed..

Whisper:~ lithyem$ sudo port install py27-pygame
Error: Port py27-pygame not found

All worked fine up to there. Any ideas? Google gives me ZERO :(

]]> Comment on Printrbot jr assembly part 2 by Mochaboy http://kullander.nu/blog/2013/02/08/printrbot-jr-assembly-part-2/comment-page-1/#comment-232777 Wed, 19 Jun 2013 14:08:53 +0000 http://kullander.nu/blog/?p=82#comment-232777 Just pulled the trigger on mine so I’ll be back before long :)

]]> Comment on Crazyflie has arrived – setting up on my Mac by blog http://kullander.nu/blog/2013/05/06/crazyflie-has-arrived-setting-up-on-my-mac/comment-page-1/#comment-232676 Thu, 23 May 2013 21:21:09 +0000 http://kullander.nu/blog/?p=172#comment-232676 It seems to work fine for me actually, did get hit by that 100% throttle on controller disconnect bug though. Which was an interesting experience, the crazyflie is crazy fast! I would try asking on the bitcraze forums.

]]> Comment on Crazyflie has arrived – setting up on my Mac by Bryan http://kullander.nu/blog/2013/05/06/crazyflie-has-arrived-setting-up-on-my-mac/comment-page-1/#comment-232629 Fri, 10 May 2013 07:26:17 +0000 http://kullander.nu/blog/?p=172#comment-232629 I’ve successfully brought up the GUI control app, and I’ve connected to the quadcopter. Initially before I did my soldering it looked like the telemetry data was reading in correctly, although it was lagging a bit. Now I’ve finished my soldering and the motors spin correctly at boot and the green LED flashes 5 times, indicating a successful systems check. However, connecting to the copter is now showing incorrect telemetry data. It just seems to wander all around. Just wondering if you’ve seen this and if it might be something on the software side that I can reset or fix. Thanks!

]]> Comment on Crazyflie has arrived – setting up on my Mac by skube http://kullander.nu/blog/2013/05/06/crazyflie-has-arrived-setting-up-on-my-mac/comment-page-1/#comment-232624 Tue, 07 May 2013 01:20:50 +0000 http://kullander.nu/blog/?p=172#comment-232624 This is great. I was trying to get things working using Homebrew instead of MacPorts, but wasn’t really having any luck.

]]> Comment on Printrbot jr assembly part 1 by Printrbot Jr assembly part 4 | Christian Kullander http://kullander.nu/blog/2013/02/07/printrbot-jr-assembly-part-1/comment-page-1/#comment-152829 Sun, 17 Feb 2013 22:10:37 +0000 http://kullander.nu/blog/?p=58#comment-152829 […] to the other parts of the build: part 1, part 2 and part […]

]]> Comment on Printrbot jr assembly part 1 by Printrbot jr assembly part 3 | Christian Kullander http://kullander.nu/blog/2013/02/07/printrbot-jr-assembly-part-1/comment-page-1/#comment-152828 Sun, 17 Feb 2013 11:31:34 +0000 http://kullander.nu/blog/?p=58#comment-152828 […] Part 1 is available here and Part 2 […]

]]>